SHARPAL 198H 3 Stages Professional Electric Knife Sharpener, Diamond Roll Sharpener for Razor-Sharp Result, Low Noise |One-handed operation, Beginner-friendly| Suit for Double-edged & Serrated Knives

Product Description

Three Functional Slots:

NOTE:

Due to some handle designs, you may not be able to sharpen the entire length of the blade using the electric sharpening wheel for some knives with a thick bolster near the handle. Recommend using the Manual Stage 3 in these limited cases.Try to sharpen with Stage 2 Fine Diamond Wheel or Stage 3 CERAMIC Slot firstly for your valuable knives.

KNIFE SHARPENING INSTRUCTION

The Stage 1 is for the dull or damaged edge that requires a new edge setting. The Stage 2 is for the blade with a slightly dull edge. If the knife is already reasonably sharp, skip Stage 1 and go directly to Stage 2.

Note:

Light downward pressure is sufficient, heavy pressure might cause the diamond wheel stuck and stop working.

Detachable AC to DC 12V power supply adapter Included

Input: 100V~240V, 50~60Hz, Max 0.6AOutput: DC 12V, Max 2.0ADC Connector: 5.5mmx2.1mmCable Length: 47.2 inch (120cm)Plug: US plug Type A

Lower Noise, More Serenity

The noise level is below 65 dB and can even reach 55 dB.

Enhanced ComfortConcentration and Focus

SHARPAL 198H electric knife sharpener produces less noise than traditional models, providing a more serene and focused environment for knife maintenance.

TIPS

Frequently Asked Questions

Q: Sometimes the sharpening wheel stalls when I am drawing the knife through the sharpening slots. What causes this?

A: The knife sharpener is designed to use very little effort to pull the blade through the sharpening slots. If excessive downward pressure is applied to the knife as it is being pulled through the sharpening slots, the sharpening wheel will stall.

Q: How often should I sharpen my knives?

A: One quick and simple paper test to check the condition of your blade: If you can slice paper effortlessly with your knife and it doesn’t catch and tear, your knife is in good shape. If the paper crumples beneath the knife or the cutting edge catches on the paper, it indicates your knife is dull. Then please use the electric knife sharpener to put a new razor-sharp edge on your blade.

Q: How many pulls should I sharpen my knife?

A: 15 pulls is a good starting point for a dull knife. On a very dull edge, it will start with 20 pulls; if it is still not sharp, please repeat until the cutting edge is sharp. If just touching up, 5 pulls will be enough. Hard steel blades need more times of pulls than softer-steel blades to sharpen.

Q: Is this dual voltage? Does this work on 220V or 240V?

A: SHARPAL 198H electric knife sharpener is designed to work on a wide range of voltage inputs, specifically 100V to 240V at 50-60Hz. It comes with an AC to DC 12V power supply adapter that accommodates this voltage range, ensuring compatibility with various power sources.

MAINTENANCE:

Always unplug the appliance before cleaning or storing it.Clean the exterior with a damp soft cloth. Do not use any lubricant or water to clean the diamond abrasive wheel.No oil or other lubricating liquid is necessary with this sharpener.

Three Functional Slots: This SHARPAL Electric Knife Sharpener is designed with 3 stages to ensure a razor-sharp edge on most double-beveled straight edge and serrated knives. Simultaneous grinding of both blades saves much time and ensures that both blades are sharpened the same number of times. It provides a professional sharpening experience right in your kitchen.
Perfectly preset grinding wheel angles—20-degree: Ideal for a wide range of knives, including both kitchen and outdoor knives. It helps in maintaining the durability of the blade, less prone to chipping and dulling over time. Compared to meticulous precision 15-degree angle, this user-friendly approach simplifies knife maintenance.
One-handed operation, Extremely beginner-friendly: With its innovative design, this sharpener can simultaneously sharpen both sides of a double beveled knife edge, making the sharpening process fast, efficient, and requiring no special skills. Whether you’re a seasoned chef or a beginner, this sharpener caters to all skill levels.
Noise-Slightly Operation: While some electric sharpeners can be loud and disruptive, this SHARPAL Electric Knife Sharpener operates with minimal noise (Noise level even less than 65 dB), allowing you to sharpen your knives without disturbing others in the kitchen. Additionally, it features a built-in mechanism to collect iron filings making cleanup a breeze.
Blade-friendly Design: With advanced technology, this sharpener will not de-temper the blade(Overheat Protection), ensuring the longevity and durability of your knives. Rest assured that your cherished knives are in safe during the sharpening process.
Removable Magnetic Receptacles for collecting metal fillings, making cleanup a breeze.